DIN51130 Ramp Test Instrument for Floor Slip Resistance Coefficient Testing

I: Machine Purpose

This equipment is used for type testing of the anti-slip performance of escalator and moving walk steps, tread surfaces, comb support plates, and floor plates. The device features a non-distortable 600mm wide by 2000mm long plate serving as a simulated tilting platform, with an adjustable longitudinal slope ranging from 0° to 45°. A servo motor drives the platform at a specified angular velocity via a lead screw mechanism. Under the operator's control, the angle is incrementally adjusted in 0.5° steps. Before testing, lubricant is applied to both the test surface and the test shoe sole. The operator, wearing protective gear, maintains an upright posture and walks back and forth on the test platform in half-shoe-length steps along the observation direction. The test platform begins tilting from the horizontal position at a rate of 1.0°/s, stopping when the tilt angle is reached. The tilt angle is recorded, and the process is repeated three times to ensure accuracy of the angle values.

II: Basic Parameters

1. Applicable Standards: GB16899-2011 "Safety Code for the Construction and Installation of Escalators and Moving Walks"; DIN51130:2004 "Testing of floor coverings - Determination of the anti-slip properties - Workrooms and fields of activities with slip danger, walking method - Ramp test"; "Elevator Type Test Rules" (2012) Appendix KZ - Type Test for Anti-slip Performance of Steps and Tread Surfaces, Comb Support Plates, and Floor Plates

2. Standards followed during equipment manufacturing:
GB/T2611-2007 "General Technical Requirements for Testing Machines"
GB16754-1997 "Mechanical Safety - Principles for the Design of Emergency Stop Equipment"
GB/T5226.1-1996 "General Technical Conditions for Industrial Machinery Electrical Equipment"

3. Test result accuracy: ±0.05°;

4. Maximum platform tilt angle: 45°;

5. Lifting speed: 0.1°/s to 2°/s;

6. Motion method: Servo motor control with adjustable speed and angle;

7. Testing method: Simulates actual working conditions with natural human walking, equipped with three standard test plates;

8. Testing process: European standard DIN ISO5725-5; real-time monitoring by test personnel throughout;

9. Standard sample: European standard DIN51130:2004;

10. Test shoes: (Provided by the customer)