Boshi always adheres to the business philosophy of "gaining reputation through quality, winning customers with advanced technology," striving to build a modern enterprise with a more pragmatic spirit, superior products, and comprehensive services.

Main products: Free float steam traps, thermodynamic steam traps, inverted bucket steam traps, adjustable bimetal steam traps, lever float steam traps, high-temperature and high-pressure steam traps, and bypass valve steam traps.

Boshi Valve Company's products include American standard and national standard: globe valves, stainless steel globe valves, ball valves, stainless steel ball valves, plunger valves, plug valves, gate valves, butterfly valves, needle valves, pressure reducing valves, electric valve devices, welding, threading, etc.

Float Type Flange Steam Trap Imported National Standard BXF2F BXF12F Series

Product Overview:
Detailed product description: The float type steam trap consists of a thermostatic air vent, float lever, and valve seat.
Not suitable for superheated steam. Suitable for processes with control valves or solenoid valves at the front end. When the control valve or solenoid valve closes, steam rapidly cools, easily creating a vacuum. A vacuum breaker must be installed to prevent water hammer caused by the sudden opening of the valve due to front-end condensate. All-stainless steel structure, rust-free, suitable for corrosive environments and places with high hygiene requirements. High pressure resistance, simple and elegant appearance. Replaceable parts. Can discharge large amounts of non-condensable gases during startup. Suitable for use with front-end temperature control equipment. Continuous discharge, low noise. Internal water seal blocks steam, effective. Multiple throttle orifice options available to achieve drainage capacity under different pressures. Reacts immediately to condensate. Can drain by gravity when there is a vacuum inside the heat exchanger. Cover pipe threads allow installation of check valves to test the steam trap.

The float type flange steam trap utilizes the density difference between condensate and steam. Changes in condensate level cause the float to rise or fall, driving the valve disc to open or close, achieving the purpose of blocking steam and draining water. The fundamental role of the float type flange steam trap is to expel condensate, air, and carbon dioxide gas from the steam system while maximizing the automatic prevention of steam leakage.

Performance parameters of the float type flange steam trap:
Applicable pressure: ≤17K; Applicable temperature: ≤230°C; Nominal diameter: 15-100mm

Valve body material: Malleable iron A536; Internal parts material: Stainless steel; Connection method: Flange connection

Specification parameters of the float type flange steam trap:

Features of the float type steam trap:
The float type steam trap consists of a thermostatic air vent, float lever, and valve seat. Not suitable for superheated steam.
Suitable for processes with control valves or solenoid valves at the front end. When the control valve or solenoid valve closes, steam rapidly cools, easily creating a vacuum. A vacuum breaker must be installed to prevent water hammer caused by the sudden opening of the valve due to front-end condensate, which could damage the steam trap. The top cover has an inspection hole where a check valve can be installed to immediately determine if the steam trap is functioning properly. Parts are made of stainless steel and hardened chrome steel valve seats, wear-resistant and corrosion-resistant. Can discharge large amounts of non-condensable gases during startup. BXF12 and BXF12F feature a double valve seat design for extra large flow. Small diameter series can be equipped with dispersers to reduce water hammer impact. Strong back pressure resistance, suitable for recovery systems. Continuous drainage with low noise. Large volume, not frost-resistant. Must be installed horizontally without tilting. Replaceable parts.