Handheld Process Signal Calibrator CP 6632

The Handheld Process Signal Calibrator CP 6632 is used for measuring or generating process signals such as process current and voltage (with a reading accuracy of 150 ppm). This instrument is rugged and easy to use, designed to simplify the maintenance of sensors and transmitters that utilize process signals like 4-20 mA or 0-10 V.

Thanks to its scaling function and specific ranges, the instrument is suitable for a variety of process installations. It can simulate ramps, steps, and fixed values to control process transmitters, panel meters, and recorders.

Low temperature coefficient: 15 ppm/°C for voltage and 20 ppm/°C for current. With its high accuracy of 150 ppm, the CP 6632 is an ideal standard for field use, even under demanding environmental conditions.

The CP 6632 comes standard with 4 alkaline AA batteries. An optional battery charger is available for use with rechargeable batteries.

Key Features:
- High accuracy: 0.015% reading, with resolution of 1 mV and 1 μA

- Values displayed in A, mV, and %

- Low temperature coefficient: 15 ppm/°C for voltage, 20 ppm/°C for current

- Active or passive loop power supply

- Measurement with HOLD function

- Simulation of ramps, pre-programmed steps, and frequency synthesizer values

- Display of minimum, maximum, and average values

- Backlight


General Specifications

Size: 157 x 85 x 45 mm

Weight: 306 g

Display: 160 x 160 pixel LCD graphic display with backlight
Results displayed in value table or trend curve form

Power Supply:
4 AA batteries 1.5 V or rechargeable NiMH batteries, optional with built-in charger
Autonomy:
> 53 hours in measuring voltage and current and simulating voltage
> 12 hours in simulating current

Communication Port: USB interface


Environmental Specifications
Reference range: 23°C ± 5°C (relative humidity: 45 to 75%, no condensation)
Operating reference range: -10 to 50°C (relative humidity: 20 to 80%, no condensation)
Extreme operating range: -15°C to +55°C (relative humidity: 10 to 80%, no condensation) (70% at 55°C)
Storage temperature limits: -30°C to +60°C
Maximum altitude: 0 to 2,200 m
IP protection: IP54 compliant with EN60529

Safety Specifications

Protection:
Electronic protection up to 250 V for "voltage" wires
Fuse protection for "current" wires
Protection against "current" break during inductive resistance measurement

Class:
Compliant with EN 61010-1
Class II, Pollution Degree 2

Rated voltage: 60 V

Shock and Vibration: EN 61010-1 standard

EMC Compliance
Immunity:
EN 61000-4-2
EN 61000-4-3 standard
EN 61000-4-5 standard
EN 61000-4-6 standard
EN 61000-4-11 standard
EN 61000-4-4
Conducted and Radiated Emissions:
EN 55022, Class B
EN 61000-3-2 standard
EN 61000-3-3 standard


Instrument:
CP 6632 Handheld Voltage and Current Process Calibrator
Standard Delivery:
- User manual
- 4 AA batteries
- 2 cables with alligator clips
- Protective case
- Carrying strap
- Factory test report

Accessories:
AC6908 Soft carrying case for handheld instruments
AN6011 Charger + batteries for handheld instruments

Certification:
QMA11EN COFRAC calibration certificate
Includes all relevant points tested on the device

Packaging Information:
Dimensions 157 x 85 x 45 mm
Weight (without packaging) 306 g