I. Overview

The MC-3000P handheld coating thickness gauge uses the electromagnetic induction method to quickly, non-destructively, and precisely measure the thickness of coatings and platings.

This instrument complies with the following standard: GB/T4957-2003 Method for measurement of thickness of non-magnetic coatings on magnetic base metals

II. Main Technical Performance

l Magnetic induction principle, enabling non-destructive measurement of non-magnetic coating thickness (such as zinc, aluminum, chromium, copper, rubber, enamel, paint, etc.) on magnetic metal substrates (such as steel, iron, alloys, and hard magnetic steel, etc.)

l Pen-style integrated thickness gauge, operated with one hand, more portable and easier to use;

l Equipped with temperature compensation function and "phase-locked loop" technology, ensuring stable measurement and adaptability to more worksites;

l Supports system calibration, zero calibration, and one-point calibration methods, with system calibration capable of correcting the entire range;

l Supports large font mode, displaying in large fonts for easy observation and recording of on-site thickness data;

l Supports monitoring mode, allowing setting of upper and lower limit alarms, sound alarms, and colored light alarms to monitor all measurement statuses on-site;

l Supports statistical mode, with real-time on-screen statistics of average, maximum, minimum values, and number of measurements;

l Supports screen inversion display for viewing measurement data in different scenarios.

l Built-in Chinese and English menu display;

l Equipped with storage function, capable of storing up to 1000 measurement values;

l Stored data supports viewing and deletion, allowing deletion of specified data or all data;

III. Technical Parameters:

l Probe type: F1.2 probe

l Measurement principle: Magnetic induction

l Measurement range: 0~1250μm

l Minimum substrate flat diameter: 15mm

l Minimum curvature radius (concave): 6mm

l Minimum curvature radius (convex): 2mm Measurement accuracy (H is thickness value): ±(1~3)%H±1μm or H±2μm

l Display resolution: 0~99.9μm: 0.1μm; 100~9999μm: 1μm;

l Probe type: F for magnetic probe

l Substrate critical thickness: F:1mm

l Storage method: 1000 stored data points

l Calibration methods: System calibration, one-point calibration, zero calibration

l Measurement modes: Simplified mode, monitoring mode, statistical mode

l Display languages: Chinese, English

l Factory reset: Allows user to restore to factory settings

l Operating environment: Relative humidity: ≤90%; Temperature: -10℃~+50℃

l Power supply: LIR2450 rechargeable button battery

l Main unit dimensions: 145mm(L)*37mm(W)*22mm(H)

l Total weight: Approximately 77g (including battery)

III. Standard Configuration of MC-3000P Coating Thickness Gauge:

1. MC-3000P coating thickness gauge main unit             one unit

2. LIR2450 rechargeable button battery                two pieces

3. Charger + charging cable                       one set

4. Iron base                                one piece

5. 5 standard calibration foils      　　　　　　       one box

6. Lanyard                                one piece

7. Instrument case                              one unit

Manual, certificate of conformity, warranty card                one set