I. KODIN 3A-YD Intelligent Hardness Tester Product Features

1. Chart mode allows viewing the hardness value of each measurement point of the workpiece, integrating data analysis and hardness fluctuation distribution charts, making the workpiece hardness clear at a glance.

2. Report mode provides real-time analysis of the measured workpiece's name, image, data, measurement settings, date, and other information in report form, which can be shared with remote partners.

3. Video call mode enables real-time interaction of remote measurement processes via video or audio, allowing management personnel at the monitoring center to perform remote management, synchronous communication, and expert diagnosis.

4. Kexin Cloud Platform allows sharing measurement data/videos with colleagues on the "Kexin Platform" for remote real-time collaborative operations.

5. Equipped with a digital impact device, compatible with all 7 types of probes, automatic probe type recognition, and software calibration function, no recalibration required when changing probes.

6. Voice broadcast function, real-time announcement of measurement data during the measurement process.

II. KODIN 3A-YD Technical Parameters

1. Display: 3.97-inch IPS high-definition color screen, 480*800 pixels

2. Data interfaces: Bluetooth, WIFI, 4G, USB

3. Processor: 64-bit quad-core 1.3G CPU with Android operating system

4. Measurement modes: Chart mode, Report mode, Video mode, Recording mode, Landscape mode

5. Hardness scales: Leeb (HL), Brinell (HB), Rockwell B (HRB), Rockwell C (HRC), Vickers (HV), Shore (HS)

6. Measurement directions: 360° vertical downward, downward tilt, horizontal, upward tilt, vertical upward

7. Measurable materials: Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, pure copper, ductile cast iron, cast aluminum alloy, copper-zinc alloy (brass), forged steel (forged steel rolls, cast iron rolls, cast steel rolls are specialized materials for rolls)

8. Measurement range: HLD (170～960) HLD

9. Calibration method: System calibration

10. Storage: Local storage, expandable with TF card

11. Data reports: Charts, images, histograms;

12. Display languages: Built-in Chinese, English;

13. Key backlight: Backlight can be turned on and off;

14. Shutdown methods: Key shutdown, software icon shutdown optional;

15. Protection rating: Waterproof, dustproof, drop-resistant

16. Operating conditions: Relative humidity: ≤90%; Temperature: -10℃~+40℃;

17. Operating time: ≥7 hours (at minimum backlight brightness);

18. Power supply: Built-in lithium polymer battery;

19. Main unit dimensions: 161mm(L)*73mm(W)*21mm(H);

20. Total weight: 252g (excluding probe)

III. KODIN 3A-YD Portable Leeb Hardness Tester Standard Configuration

1、KODIN 3A-YD Leeb Hardness Tester main unit      One unit

2、D-type impact device                     One piece

3、Leeb hardness block 760±50HLD　　　　   One block

4、Small support ring　　　　　　　　　　　　 One   

5、Nylon brush A                          One piece

6、Data cable, charger                   One set

7、User manual                       One copy

8、Warranty card, certificate of conformity                   One copy

9、Carrying case                           One piece

10、SIM card ejector pin                    One piece