Below is the installation guide for the tank point-type fluidizer (fluidizing nozzle)
The cone surface is polished smooth; the fluidizer flange is fully welded to the silo wall and undergoes airtightness testing;
Pulse-type air supply is adopted (2 seconds on / 10 seconds off), saving over 30% energy.
Troubleshooting
Weakened airflow: Disassemble and clean the sintered mesh (backflush with 0.4MPa compressed air);
Powder leakage: Replace the sealed graphite gasket (temperature resistant up to 450°C).
Replacement Cycle
Sintered mesh is replaced every 12 months; seals are inspected every 6 months.

I. Manufacturer and Model Selection Reference
Model??Material??Unit Price??Manufacturer
DN100 Point-Type??316L Sintered Stainless Steel Mesh??￥860??Jinglan Environmental
DN80 Cone Fluidizer??304 Stainless Steel + Ceramic Lining??￥650??Xiangye Environmental
DN125 Custom Type??High-Temperature Alloy Steel??￥2000??Lanhao Environmental
Selection Advice:
For high-sulfur coal powder environments, choose 316L material for corrosion resistance;
High-pressure systems (＞1.6MPa) require custom thickened housing.

II. Key Precautions
Safe Operation
Before maintenance, the tank must be depressurized and emptied; working under pressure is strictly prohibited;
Install explosion-proof solenoid valves in nitrogen environments.
Efficiency Verification
After commissioning, test the residual coal powder on the cone: qualified standard ≤0.3kg/m2.
Application Value: Through point-type fluidization technology, the coal powder silo emptying rate increases from 75% to 98%, and equipment failure rate decreases by 40%.