>>Product Introduction

The European-style cable branch box is a cable engineering equipment widely used in power distribution network systems in recent years. Its main features include bidirectional door opening, the use of butt sleeves as connecting busbars, and significant advantages such as compact length, clear cable arrangement, and no need for large-span crossovers for three-core cables. The cable connectors used comply with the DIN47636 standard.
Generally, bolt-fixed connecting cable connectors with a rated current of 630A are adopted.

>>Model Meaning

>>Normal Operating Environment

◇Ambient temperature: Maximum temperature: +40℃, Minimum temperature: -30℃
◇Wind speed: Equivalent to 34m/s (not exceeding 700Pa)
◇Humidity: Daily average relative humidity not exceeding 95%, Monthly average relative humidity not exceeding 95%
◇Seismic resistance: Horizontal acceleration not exceeding 0.4m/s2, Vertical acceleration not exceeding 0.15m/s2
◇Installation site inclination: Not exceeding 3°
◇Installation environment: The surrounding air should not be significantly polluted by corrosive, flammable gases, water vapor, etc. The installation site should be free from severe vibrations.
◇If the product is ordered under conditions beyond the above specifications, please consult our company.

>>Main Technical Parameters

>>Structure Description

The DFW European-style cable branch box is designed for outdoor use, featuring a fully sealed structure, full insulation, dustproof, moisture-resistant, flood-resistant, corrosion-resistant, and highly adaptable to the environment. The cabinet protection level reaches IP33. The cable connector bracket is made of stainless steel, and the outer shell is manufactured from stainless steel plate or cold-rolled plate with spray coating.
The cable connector bracket is located at the upper part of the tap box, used to support the sleeves, which in turn secure the cable connectors. If equipped with surge arresters, they are installed at the end of the cable connectors. Additionally, short-circuit fault indicators and live display devices are also installed inside the branch box. All live components of the main circuit inside the box are insulated using pre-made plug-in cable terminals. The cable partition is located at the lower part of the box, equipped with cable fixing clamps and grounding terminals. The box layout is reasonable, compact in size, structurally integrated, aesthetically pleasing, easy to install, and maintenance-free.

>>European-Style Cable Branch Box Foundation Diagram

>>Ordering Information (Box Configuration Plan)