Compressed Air Stainless Steel Filter Compressed Air Sterilizing Filter

【1】The stainless steel filter is a pressure filtration device. The raw liquid flows into the filter bag installed in the mesh through the feed inlet, is pressurized, the qualified product penetrates the filter bag, is discharged from the outlet, and enters the next process, while impurity particles are captured by the filter bag. The entire process is simple, and replacing the filter bag is convenient, with virtually no material consumption.

Stainless Steel Filter:

1. Large processing capacity, small size, high dirt holding capacity.

2. Based on the working principle and structure of the bag filtration system, replacing the filter bag is convenient and fast, and the filter requires no cleaning, saving labor and time.

3. Low probability of filter bag leakage, ensuring strong filtration quality.

4. The bag filter can withstand higher working pressure, has low pressure loss, and low operating costs.

5. The filtration accuracy of the filter bag continues to improve and has now reached 0.5μm.

6. The bag filter has a wide range of applications, suitable for various solid and liquid filtrations, is flexible to use, and has multiple installation methods.

Stainless Steel Compressed Air Sterilizing Filter

Interface: G1 Capacity: 1.5M3/min

Interface: G1 Capacity: 1.5M3/min

Interface: G1-1/2 Capacity: 1.5M3/min

Interface: G1-1/2 Capacity: 1.5M3/min

Interface: DN50 Capacity: 1.5M3/min

Interface: DN65 Capacity: 1.5M3/min

Interface: DN65 Capacity: 1.5M3/min

Interface: DN80 Capacity: 1.5M3/min

Interface: DN80 Capacity: 1.5M3/min

Interface: DN100 Capacity: 1.5M3/min

Filter Bag Material: Special filter bags; oil filter bags, oil absorption bags, activated carbon filter bags

Note: When selecting the model, choose the filter bag material according to the filtration temperature.

Applicable Materials: Paint, beer, vegetable oil, cosmetics, chemicals, petroleum products, textile chemicals, photochemicals, electroplating solution, milk, mineral water, hot solvent, latex, industrial water, sugar water, resin, ink, industrial wastewater, fruit juice, edible oil, waxes, etc.

▽ Main Performance

◆ Filtration Accuracy: Above 0.22μm, belonging to the microfiltration category

◆ Filtration Efficiency: 99.9999%

◆ Flux: ≥5 Nm3/min (0.1Mpa pressure, 0.01Mpa pressure difference 10")

◆ Steam Sterilization: According to actual usage, steam temperature <140°C, 30 minutes/time. After 100 steam sterilization cycles or when the filter element pressure difference reaches 0.07~1.0MPa, replace with a new sterilizing filter element.

◆ Pressure Resistance: 0.2Mpa (forward pressure difference)

◆ Initial Pressure Drop: 0.005Mpa

◆ Length: 125mm (5"), 250mm (10"), 500mm (20"); Diameter: 70mm

◆ Filtration Area: 0.32mm (5"), 0.65mm (10"), 1.3mm (20"); Filtration Medium: PVDF membrane

◆ Inner and Outer Support: Heat-resistant polypropylene

▽ Characteristics of the Sterilizing Filter

◆ The sterilizing filter adopts a cross-suspended design with horizontal inlet and outlet. Multi-core filters can be designed as floor-standing types.

◆ Airflow Direction: From outside to inside through the filter element.

◆ The compressed air entering the sterilizing filter must pass through at least three stages of precision filters and a dryer. It must remove oil, water, and dust, with an oil mist concentration ≤0.01PPM; otherwise, it will affect the lifespan of the sterilizing filter element and the expected sterilization effect.

◆ Regular sterilization: According to actual usage, once or twice per week or month, each time for 30 minutes, using clean saturated steam with a filtration accuracy of 1μm for sterilization. Steam temperature <140°C, steam pressure <0.3MPa, 30 minutes/time. After 50 steam sterilization cycles or when the filter element pressure difference reaches 0.07~1.0MPa, replace with a new sterilizing filter element. Valves should be opened and closed slowly.