SV-10 Sine-wave Vibration Viscometer Technical Specifications: ◆ Model: SV-10 ◆ Range: 0.3–10000 mPa·s ◆ Measurement Method: Tuning Fork Vibration ◆ Vibration Frequency: 30 Hz ◆ Accuracy: 1% SV-10 Sine-wave Vibration Viscometer Key Features: ◆ Wide measurement range: SV-10: 0.3–10000 mPa·s, SV-100: 1000–100000 mPa·s ◆ Temperature measurement from 0 to 160°C ◆ High repeatability accuracy of 1%, ensuring reliable results ◆ Only 35 ml sample required; optional 10 ml small sample cup and 13 ml glass sample cup available ◆ Easy-to-clean sensor disc and temperature probe ◆ Connect to computer using WinCT-Viscosity software to display data and graphs ◆ Viscosity calibration function ◆ Simple calibration using pure water (SV-10) ◆ Temperature control application with AX-SV-37 circulating water bath ◆ Standard vibration method certified by JCSS (Japan Calibration Service System) Introduction to the Japan A&D SV-10 Sine-wave Vibration Viscometer: The innovative sine-wave vibration method ensures high accuracy and a wide measurement range without the need to replace sensor discs. The SV-10/SV-100 viscometer uses a 30 Hz current to drive two sensor discs, maintaining a 1 mm amplitude for viscosity measurement. Features of the Japan A&D SV-10 Sine-wave Vibration Viscometer: ◆ High Accuracy Employs sine-wave vibration technology with a repeatability accuracy of 1% (standard deviation). ◆ Extremely Wide Continuous Measurement Range Capable of continuous measurement across a broad viscosity range: SV-10: 0.3–10000 mPa·s, SV-100: 1000–100000 mPa·s, without needing to replace the viscosity sensor. ◆ Standard Temperature Sensor Equipped with a standard temperature sensor located between the two viscosity sensor discs, enabling precise temperature measurement and accurate reflection of the relationship between liquid viscosity and temperature. ◆ Real-Time Measurement Low heating capacity of the viscosity measurement unit (sensor disc and temperature probe) allows for short temperature equilibrium time, ensuring precise viscosity measurement. ◆ Long-Term Continuous Measurement The 30 Hz low frequency and less than 1 mm amplitude minimize the load on the sample, preventing temperature rise during measurement and enabling long-term continuous viscosity monitoring. ◆ Measurement of Non-Newtonian Liquids and Foam-Containing Samples The small sensor discs avoid sample deformation, allowing stable measurement of non-Newtonian liquids. Foam-containing samples can be measured without disrupting the foam structure. ◆ Measurement of Stirred or Flowing Samples The two sensor discs vibrate in opposite directions, eliminating errors even in unstable samples. This allows measurement of stirred samples and enables use in production lines, with data comparable to laboratory results. ◆ Calibration Calibration can be performed using standard viscosity liquids or samples with known viscosity. This ensures measurement accuracy and allows adjustment to match results from other viscometers. The SV-10 can store measurement data from other types of viscometers. ◆ Standard Windows Communication Software: WinCT-Viscosity Includes WinCT-Viscosity software (on CD-ROM) as standard. The CD-ROM also contains RsVisco graph plotting software, which enables real-time display of viscosity results. With RsVisco, changes in viscosity over time and temperature can be easily observed and recorded, with data saved in file format.