Laboratory Spray Dryer GB211C-A
Contact Info
- Add:廣州市天河區(qū)廣汕二路13號(hào)-327-1房, Zip: 510630
- Contact: 譚真東
- Tel:020-87031216
- Email:13808866455@139.com
Other Products
The Yamato YAMATO Spray Dryer GB211C-A supplied by Guangzhou Jincheng Scientific Instrument Co., Ltd. is suitable for spray processing of water-soluble and organic solvent-based samples (when connected to GAS411C). By connecting the organic solvent recovery device GAS411C, it enables professional and safe handling of samples containing organic solvents. This fully-featured, easy-to-operate, and intelligent spray dryer is widely used in research and development for food, pharmaceuticals, new materials, as well as sample coating.
Spray Dryer Features:
The resulting fine powder after spraying has low moisture content, is oxidation-free, and contamination-free.
Since it directly dries solvent or suspension samples into fine powder form, it eliminates the need for traditional powder preparation steps such as filtration, separation, and crushing, thereby avoiding contamination during these processes.
By connecting the organic solvent recovery device GAS411C, it enables professional and safe handling of samples containing organic solvents.
When equipped with the optional granulation component GF200, it can function as a fluidized bed drying granulator.
Equipped with an electric lift for easy installation and removal of accessories.
Features a power outlet (2A) for supplying electricity to a stirrer, allowing continuous stirring of suspensions during sample introduction.
Utilizes a unique peristaltic sample pump, nozzle cooling mechanism, pulse nozzle cleaning mechanism, and anti-clogging needle to ensure diverse and stable spray conditions.
New 7-inch large touchscreen control panel with optional Chinese, Japanese, or English language support for simple and convenient operation.
Compatible with both fluid and three-fluid nozzles.
Supports experimental data recording and storage (optional feature).
Capable of remote control.
Utilizes zoned temperature control for faster and more stable heating.
Wider temperature setting range to accommodate more sample experiments.
Widely used in research and development for food, pharmaceuticals, new materials, as well as sample coating.
Spray Dryer Parameters:
Model: | GB211C-A |
Suitable Samples for Spraying: | Water-soluble & organic solvents (when connected to GAS411C) |
Performance: | Max. moisture evaporation capacity: 1500 ml/h Temperature controller setting range: 40~240°C (inlet temperature), 0~100°C (outlet temperature) Temperature control accuracy: inlet temperature ±1°C Drying air volume adjustment range: 0~1.0 m/min Spray air flow adjustment range: 0~30 L/min |
Configuration: | Nozzle cleaning function: manual pulse air cleaning from nozzle tip External output: inlet temperature, outlet temperature output (4~20mA) Temperature controller: multi-PID control Touchscreen: temperature control, blower, heater, liquid feed pump, pulse air switch, automatic needle clearing, alarm display, operation curve Control switch: inlet temperature, outlet temperature control switching Temperature sensor: PT100 thermal resistor Heater: 3.2 kW Liquid feed pump: tubing-type peristaltic pump Spray air pump: uses spray air compressor (sold separately) or built-in compressor of GAS411C when connected to organic solvent recovery device GAS411C (sold separately) Service outlet: for stirrer: AC220V, 2A Inlet blower: tube-type blower Filters: inlet filter, exhaust filter Solvent recovery: uses solvent recovery device GAS411C (sold separately) Spray nozzle cooling structure: connectable to CF312L: 2 connectors, outer diameter 10.5 mm (sold separately) Spray air connection: connector outer diameter 7 mm Spray air pressure: 0.3 MPa Exhaust connection diameter: Ф50 mm |
Safety Functions: | Inlet and outlet overtemperature protection, liquid feed pump reverse function, overcurrent leakage protection switch, nozzle connection abnormality (when connected to GAS411C) |
Specifications: | Dimensions: W760 x D420 x H1350 mm Weight: 110 kg Power supply: AC200~230V 50Hz 16~18A |
Accessories: | 2 liquid feed tubes, 1 exhaust tube (with 1 hose clamp), exhaust adapter, outlet temperature sensor, fuse (250V 2A), static elimination wire, 5m intake tube (with 2 hose clamps), nozzle adapter bushing, stand assembly, protective cover (COV30) |
Information about the Yamato YAMATO Spray Dryer GB211C-A is provided by Guangzhou Jincheng Scientific Instrument Co., Ltd. For more details about spray drying equipment, please feel free to contact us.
| Industry Category | |
|---|---|
| Product Category | |
| Brand: | 雅馬拓YAMATO |
| Spec: | GB211C-A |
| Stock: | 300 |
| Manufacturer: | |
| Origin: | China / Guangdong / Guangzhoushi |
