Factory Direct Sales Electric Hydraulic Push RodDYTPIntegrated Straight Electric Hydraulic Push RodDYTZStraight Electric Hydraulic Push Rod

Electric hydraulic push rod, also known as electric hydraulic actuator, is suitable for reciprocating linear (or reciprocating rotation at a certain angle) motion. It can be used in places for lifting, lowering, or clamping workpieces, as well as in remote and high-altitude hazardous areas, and can be connected to a computer network for centralized (programmed) control. It is now widely used in metallurgy, mining, coal, power, machinery, grain, cement, chemical, water conservancy, transportation, and other sectors, serving as an indispensable universal power source. Working principle:
The electric hydraulic push rod uses an electric motor as the power source. Through the forward (reverse) rotation of the motor, hydraulic oil is output by a bidirectional gear pump, delivered through the oil circuit integrated block to the working cylinder, achieving the reciprocating motion of the piston rod. Advantages:
1. Automatic overload protection: During operation, if the external force on the piston rod exceeds the rated output force or the piston reaches the end point while the motor is still running, the oil pressure in the circuit increases to the set pressure, and the relief valve quickly and accurately relieves the pressure, achieving automatic overload protection. Although the motor continues to run, it will not burn out. 2. Self-locking function: The oil circuit integrated block of the electric hydraulic push rod is designed with a pressure self-locking mechanism. When the motor stops, the piston rod immediately stays in a certain position, and the pressure oil remains in a pressure-maintaining state. 3. Stepless adjustment: According to user requirements, stepless adjustment can be performed within the rated speed, output force, and stroke range.
Configuration description: The electric hydraulic push rod is mainly composed of six basic elements: the type of push rod, motor protection level, rated output force, stroke, rated speed, and usage angle. Additionally, based on user-specific requirements, it can be equipped with three adjustment functions: speed adjustment, push/pull force adjustment, and stroke adjustment (positioning by stroke switch). Except for the three adjustment functions, which must be specified in writing when ordering, other parameters should be filled in according to the model compilation method, carefully detailing the six elements. DYTZ-type parallel electric hydraulic push rod technical parameters (selection table)

Model Rated Output Force (10N) Rated Speed (mm/s) Motor Model Stroke Manufacturing Range (mm) Stroke Manufacturing Range (mm)
Thrust Pulling Force Push Speed Pull Speed
DYTZ450-/110 450 310 110 140 Y802-4-0.75KW 50-800 10-110
DYTZ700-/110 700 510 110 140 Y90S-4-1.1KW 50-1500 10-110
DYTZ1000-/110 1000 750 110 140 Y90L-4-1.5KW 50-1500 10-110
DYTZ1750-/90 1750 1300 90 115 Y100L1-4-2.2KW 50-2000 10-90
DYTZ2500-/90 2500 2050 90 115 Y100L2-4-3KW 50-2000 10-90
DYTZ3000-/90 3000 2500 90 115 Y100L2-4-3KW 50-2000 10-90
DYTZ4000-/80 4000 2950 80 100 Y112M-4-4KW 50-2000 10-80
DYTZ5000-/60 5000 3300 60 90 Y112M-4-4KW 50-2000 10-60
DYTZ6000-/60 6000 3800 60 90 Y132S-4-5.5KW 50-2500 5-60
DYTZ7000-/50 7000 4500 50 75 Y132S-4-5.5KW 50-2500 5-50
DYTZ8000-/50 8000 5000 50 80 Y132M-4-7.5KW 50-2500 5-50
DYTZ10000-/40 10000 6500 40 60 Y132M-4-7.5KW 50-2500 5-40
DYTZ15000-/35 15000 11000 35 45 Y132M-4-7.5KW 50-2500 5-35
DYTZ20000-/25 20000 15000 25 35 Y132M-4-7.5KW 50-2500 5-25
Note: 1. The voltage level of the motors listed in the table above is 380V, with a protection level of IP44 and an insulation class of B. 2. For stroke or speed manufacturing ranges beyond those listed, please specify separately; otherwise, production will follow the technical parameters in the table. 3. The speed range in the table is for horizontal use; the speed for upward or downward use is half of that for horizontal use. 4. The typical model and power listed in the table represent the power when the push rod's rated output force and rated speed are at their maximum values. Motor power is proportional to the push rod's thrust and speed.

Main products of our company:DTElectric Push RodDYTZElectric Hydraulic Push RodElectro-hydraulic jaw gate, electric jaw gate, electro-hydraulic corner drive, inlet sizeElectro-hydraulic push rod drive, electro-hydraulic push rod flat gate valveElectric Push RodDTZElectric Push RodDYTPElectric Hydraulic Push RodExplosion-proof Push RodDEZJaw GateElectro-hydraulic sector gateBelt Stripping MachineWire Rope Stripping MachineUnilateral DischargerBilateral DischargerWire Rope Core Belt Stripping MachineElectric Push RodDTElectric Push RodDYTPElectric Hydraulic Push RodExplosion-proof Push RodDEZJaw GateElectro-hydraulic Sector GateBelt Stripping MachineWire Rope Stripping MachineUnilateral DischargerBilateral DischargerDDZType Belt Break CatcherBelt Break Catcher for Belt ConveyorsBelt Break Protection Device, Belt Break Catcher Layered Belt Stripping MachineBelt Conveyor AlignerChain-type Unidirectional AlignerFully Automatic AlignerVariable Trough Angle DischargerElectro-hydraulic DischargerPlow-type Discharger

Jining Anteli Conveying Equipment Co., Ltd.

Contact: Jia Hui

Mobile: 15965378780

Tel:0537-2340887

Fax:  0537-2340887

QQ:  3128074961

Email:3128074961@qq.com

Alibaba Wangwang:jnanteli01