The 45 single-screw extruder main unit can be combined with pelletizing, film blowing, cast film, pipe, and various molding units. Inquiries are welcome! Various small-scale extruders for experimental use, film blowing machines, strip extruders, profile extruders, sheet extruders, and consumable wire extruders; two-roll mixers, flat vulcanizing machines, tablet presses, and fully small internal mixers. Special mixing instruments for sample processing and ordering! Reliable procurement hotline: 138-257-44148 Manager Shao.

Parameters:SJ-45 Extruder

-  Length-to-diameter ratio L/D=28:1,

-  Screw diameter 45mm

-  Screw speed 60r/min

-  Extrusion output 20 ----50kg/hour

-  Screw and barrel material 38CrMoAL with high nitriding treatment.

-  Barrel heated with cast aluminum heaters, 4-zone heating, heating power 8KW

-  4-stage cooling, using fan cooling, cooling power 4.8KW.

-Main motor uses AC motor, motor power 11KW

-  Variable frequency speed control, frequency converter uses TECO products.

-  Gear reduction, gears use hard tooth surfaces, gear material 20CrMoTi nitrided and ground.

-  Long service life, low noise

-Electrical control part: contactors and thermal relays are Siemens or Omron products.

-  Temperature control instruments are Japanese RKC or Omron high-intelligence instruments, other components are Chint products.

Screw diameter: Selection is based on output requirements;

Screw length-to-diameter ratio: Design is usually related to the material formulation; relatively speaking, a longer screw provides better plasticizing ability. Beyond the basic screw length, the design and machining accuracy of the thread path affect the extrusion output of mixed materials.