Product Description: ADSS optical cable adopts a loose tube stranded structure, where single-mode or multi-mode optical fibers are placed into loose tubes made of high-modulus plastic, filled with water-blocking compound. The loose tubes (and filler rods) are stranded around a non-metallic strength member (FRP) to form a compact and circular cable core. The gaps within the cable core are filled with water-blocking material, and the core is sheathed with a polyethylene inner jacket. Then, two layers of aramid yarn are applied in reverse lay for reinforcement, followed by an extrusion of polyethylene outer jacket or an anti-tracking outer jacket. F-NET Huijin's ADSS optical cable design fully considers the actual conditions of power lines, making it suitable for high-voltage transmission lines of different levels. For power lines with transmission voltage below 110KV, a polyethylene outer jacket is used; for those with transmission voltage equal to or above 110KV, an anti-tracking outer jacket is employed. Additionally, the amount of aramid and the stranding process are meticulously designed to meet the application requirements of different spans. Product Features: ? Can be installed without power interruption ? Excellent anti-tracking performance, with the anti-tracking jacket material capable of withstanding a maximum induced potential of 25KV ? Lightweight, small cable diameter, reducing the impact of ice and wind, as well as the load on towers and supports ? Large span, with maximum span exceeding 1000 meters ? Controlled aramid application process significantly enhances the tensile strength of the optical cable ? Controlled optical fiber excess length and cable stranding pitch ensure excellent tensile performance and temperature characteristics Technical Parameters: Designed according to different meteorological conditions and spans. OPGW optical cable tension clamps include: dead-end preformed armor rods, inner layer preformed rods, thimble, PD clevis, and U-bolt. In addition to the above components, it also includes grounding wire and grounding (parallel groove) clamps.

Material: Dead-end preformed armor rods: aluminum-clad steel wire; inner layer preformed rods: aluminum-clad steel wire; thimble: hot-dip galvanized precision cast steel; extension ring: hot-dip galvanized precision cast steel; U-bolt: power standard fitting.