STC provides testing services for European outdoor furniture standards BS EN581-1 and EN581-2.
Contact Info
- Add:東莞市大朗鎮富民南路68號一棟, Zip:
- Contact: 黎冠
- Tel:13790591691
- Email:darrenli@stc.group
Other Products
一站檢測，通行全球
Updates for Furniture Test
Standards (2) – EN 581-2:2009
家具測試標準更新(2)-EN 581-2:2009
| The European pre-standardENV 581-2:2000which had been used over 9 years for evaluation of the safety and performance requirements for outdoor seating, was finally revised and approved by the Technical Committee CEN/TC 207 “Furniture” into an official European StandardEN 581-2:2009. | 歐洲預備標準ENV 581-2:2000，用于評價戶外用椅子安 全和性能要求，已歷經9 年的時間，終于被CEN/TC 207“家具” 技術委員會修訂并批準為歐洲正式標準EN 581-2:2009。 |
| EN 581-2:2009supersedesENV 581-2:2000and all CEN members are required to adopt this new standard into their national standards and withdraw the conflicting standards at the latest by October, 2009. | EN 581-2:2009取代ENV
581-2:2000，強制要求所有 CEN 成員將此新標準采用為其國家標準，并要求最晚在 2009 年10 份之前回收與此標準沖突的其他標準。 |
| Similar to the
pre-standard,EN
581-2:2009specifies the mechanical safety requirements and test methods of outdoor seating for camping, domestic and contract use for adults, without regard to materials, design / construction or manufacturing processes. However, outdoor furniture for severe contract use, and information regarding ageing and degradation caused by lit, temperature and moisture are not covered by this standard. All test requirements in this standard are evaluated based on use by persons weiing up to 110 kg. | 與預備標準類似，EN581- 用及訂制成人戶外座椅的機械
|
| Compared to the pre-standard, there are
significant changes in this newEN 581-2:2009but merely as an improvement such that the standard is easier to read and follow. Listed below are some hilits for the changes. | 與預備標準相比，新的EN 581-2:2009中有重大變更， 但這些重大變更只是便于標準的理解和執行的改進。下 面列出的是變更中的一些突出點。 |
| Simplify the “General test conditions” such
as preliminary preparation, determination of seat and back loading points, application of forces, etc. by referencing toEN 1728:2000. Conditioning period of outdoor seating was changed from the original of one week down to at least 24 hours. | 簡化“一般測試條件”例如測試前的初步準備，椅 座和椅背加載點的確定，力的應用等。可參考EN 1728:2000。戶外座椅的調節期由原來的一周縮小為 至少24 小時。 |
| Similar to other furniture standards, tests,
test sequence and test parameters were illustrated in table format covering test items in the following sequences. | 類似于其它家具標準，測試，測試順序和測試參數 以下面的表格的形式說明，其中包含了測試項目。 |
| Test 測試 | Outdoor
seating Test
Sequence | Loungers 躺椅/Test Sequence 測試順序 |
| Seat and back static load test (EN
1728:2000, 6.2.1) 座位和靠背靜態載重測試 (EN 1728:2000, 6.2.1) | 1 | 1 |
| Seat front edge static load test (EN 1728:2000,
6.2.2) 座位前沿靜態載重測試 (EN 1728:2000, 6.2.2) | 2 a), b) | --- |
| Seat and back a) fatigue test for seating (EN
1728:2000, 6.7) 座具的座位和靠背疲勞測試(EN 1728:2000, 6.7) | 3 | 2 |
| Fatigue test on back rest mechanism (EN 581-2:2009,
Annex A) 靠背機構疲勞測試(EN 581-2:2009, Annex A) | 4 a) | 3 |
| Arm downwards static load test (EN 1728:2000,
6.6) 扶手向下靜態載重測試(EN 1728:2000, 6.6) | 5 b) | 4 |
| Arm fatigue test (EN 1728:2000, 6.10) 扶手疲勞測試(EN 1728:2000, 6.10) | 6 b) | 5 |
| Leg forwards static load test (EN 1728:2000,
6.12) 椅腳向前靜態加載測試 (EN 1728:2000, 6.12) | 7 b) | --- |
| Leg sideways static load test (EN
1728:2000, 6.13) 椅腳側向靜態加載測試(EN 1728:2000, 6.13) | 8 b) | --- |
| Seat impact test (EN 1728:2000, 6.15) 座位沖擊測試(EN 1728:2000, 6.15) | 9 b) | 6 |
| Foot rail static test for hiseating (EN 1728:2000,
6.4) 高座具的足部靜態測試 (EN 1728:2000, 6.4) | 10 a) | --- |
| Lifting test (EN 581-2:2009, B.2.1.7) 舉起測試(EN 581-2:2009, B.2.1.7) | --- | 7 |
| Forward stability (EN 1022:2005,
6.2-6.3) 向前穩定性測試(EN 1022:2005, 6.2-6.3) | 11 | 9 |
| Rearward stability (EN 1022:2005, 6.6) 向后穩定性測試(EN 1022:2005, 6.6) | 12 | --- |
| Sideways stability (EN 1022:2005,
6.4-6.5) 側向穩定性測試(EN 1022:2005, 6.4-6.5) | 13 | 8 |
a) These tests are
not available in ENV 581-2:2000.
這些測試在ENV 581-2:2000 中沒有。
b) Test parameters were revised in EN
581-2:2009.
在EN 581-2:2009
中修訂了測試參數。
c) “Cyclic test on backrest”,
“Test of alternating forces on the backrest for reclining seating”, “Backrest
impact test”, and
“Arm impact test”
specified in ENV 581-2:2000 were removed in EN 581-2:2009.
在EN 581-2:2009 中移除了ENV 581-2:2000 中詳細說明的 “靠背循環測試”,
“斜躺座椅靠背的交替用力測試”, “靠背沖擊
測試”, 及
“扶手沖擊測試”。
| Add a new section 6.2 Requirements to
address: - General safety requirements (6.2.1 - follows the general safety requirements of EN 581-1) - Stability requirements (6.2.2 - follows the stability requirements of EN 1022) - Mechanical safety requirements (6.2.3) | 增加的新章節6.2 要求闡述了： - 一般安全要求（6.2.1-遵照EN
581-1 的一般安 |
Add a new section 7 Instruction for Use to cover: - General
requirements (7.1)
| 增加的新章節7 使用說明包含了： - 一般性要求(7.1) （1）說明書應以本國語言提供，標題為“重要，保留以 供將來參考：仔細閱讀”字體高度應不小于 5mm。 （2）說明書中至少應該包含：制造商（生產商或供應 商）的名稱和地址，維護保養信息，及產品的使 用條件。 - 可移動躺椅標識(7.2)-可移動躺椅載重后不可被 抬起或移動，應加載圖標（圖1）標明。 |
| For reporting of test result, the test report
shall include a compliance statement with the requirements. | 測試結果的報告，測試報 告應包括對要求的符合性 聲明。 |
| 聯系人：Darren Li 黎先生 | 聯系電話：13790591691 |
| 郵箱：darrenli@stc.group | 微信/QQ：314148257 |
| Industry Category | |
|---|---|
| Product Category | |
| Brand: | STC |
| Spec: | EN581 |
| Stock: | 1000 |
| Manufacturer: | |
| Origin: | China / Guangdong / Dongshi |
