Wire Rope Tension Tester 100KN Cable Tension Measuring Instrument Rope tension detector, steel wire rope tension detector, cable tension tester, glass curtain wall cable tension detector

I. Main Purpose and Application Scope

Suitable for water conservancy industry, power industry, bridges, coal mining industry, communication industry, transportation industry, glass curtain wall decoration industry, cableway operation industry, construction industry, amusement venues, tunnel construction, port lifting, mining wire ropes, fishing industry, major research institutes and educational institutions, testing agencies, and any occasions involving tension measurement of cables, ropes, and steel wire ropes.

Rope Tension Measuring Instrument Design Patent: ZL 2021 3 0014346.8

Steel Cable Tension Tester Utility Model Patent: ZL 2021 2 0050643.2

II. Wire Rope Tension Tester 100KN Cable Tension Measuring Instrument Calibrated Cable Numbers for Different Ranges of Cable Force Measuring Instruments are as Follows:

III. Main Features

1.Lightweight, simple structure, easy to operate, suitable for any occasion.

2.Can directly measure tensioned rope structures without disassembly.

3.Application scope: Suitable for flexible, tensile cables such as various steel wire ropes and high-strength ropes.

4.Simple instrument structure, stable performance, high measurement accuracy. When the tested cable specification matches the stored cable number in the tension meter, the measurement accuracy within the rated range can reach ±3-6%.

5.Wide selection range for tested cables, convenient to use. The tension meter can store data for seven different diameters of steel cables. Simply select the corresponding cable number during measurement.

6.Capable of measuring seven different wire diameters, offering a wider measurement range.

7.Easy to operate; one person can complete a measurement within 30 seconds.

8.Application scope: Suitable for flexible tensile cables. High instrument accuracy: This instrument requires measurements to be taken according to the specifications of the calibrated cable numbers, with a measurement accuracy within 6%.

IV. Tension Measurement Operation

1.Press "ON/OFF" to enter the tension measurement state for the previously used cable number, allowing direct measurement of steel cables with the same cable number.

2.Long press "+" to enter the cable number selection program. Choose the cable number to be calibrated and press the "Zero/Confirm" key to confirm.

3.Insert the steel cable into the wheel groove and press the "Zero/Confirm" key to zero.

4.Tighten the handwheel until the steel cable reaches the limit, and the cable tension will be displayed.

5.Automatic shutdown after 30 minutes of inactivity.

6.After measurement, press the "ON/OFF" key to turn off the power.

7.Current product series: SL-10T, SL-20T, SL-30T, three models available.

8.Tension test range: 10KN-300KN.

9.Test rope diameter: SL-10T: 10mm～22mm, SL-20T: 16mm～28mm, SL-30T: 22mm～34mm.

10.Display units: kg, KN; kilograms and kilonewtons can be converted interchangeably.

Wire Rope Tension Tester 100KN Cable Tension Measuring Instrument.