●●●Dedicated to providing users with excellent quality,meticulous and attentive service●●●

●●●『sanli』●●●

We know that fire pumps can operate, so why use a fire control cabinet to control them? The reasoning behind this is actually quite simple—using a fire control cabinet offers many benefits. Below is a brief introduction.→ → →

I. (sanli)Fire Control Cabinet Product Introduction:

1. Control methods of the fire control cabinet. The control method is straightforward: one fire control cabinet controls the number of fire pumps. Common control methods include: single control, one controlling two, one controlling three, etc. This parameter is easy to understand. "1" refers to the fire control cabinet, and the following number indicates the number of fire pumps. For example, controlling three means the fire control cabinet can manage the operation of three fire pumps.

2. Startup methods of the fire control cabinet. The startup method refers to how the fire control cabinet is activated to operate. Startup methods include: direct startup, soft startup, autotransformer reduced-voltage startup, and star-delta startup. Each of these methods has its own advantages and disadvantages.

3. Control functions of the fire control cabinet. Control functions refer to how the fire control cabinet manages the fire pumps. These functions include: level control, pressure control, temperature control, time control, etc.

4. Operating conditions of the fire control cabinet. Operating conditions refer to the environmental requirements for the normal operation of the fire control cabinet. The main operating conditions are: ambient air temperature not exceeding 40°C and not falling below -5°C; ambient temperature not exceeding 35°C within 24 hours; installation altitude not exceeding 2000 meters; relative humidity not exceeding 90% (at an average temperature of 25°C); operating voltage of 380V ±10%.

II. (sanli)Installation of Fire Control Cabinet:

Importance of Inspection

For the installation of fire control cabinets, which are crucial for controlling and extinguishing fires, attention to their placement is essential. However, in some cases, the opposite occurs. For example, some units place these devices, including fire control cabinets, in awkward locations, which undermines their firefighting effectiveness. In extreme cases, some units even relegate such facilities to corners, showing little regard for their importance. As a result, during a fire, these control cabinets often cannot be located in time.

Secondly, for the installation of control cabinets, we must also inspect their responsiveness. If certain operations are found to be malfunctioning, it indicates improper installation. Such errors are unacceptable. Additionally, we need to carefully inspect internal components to ensure they function correctly. The installation location of the fire control cabinet should also be clearly marked, with explanations of its specific functions and detailed operating instructions.

Precautions

When installing a fire control cabinet, it is crucial to ensure that its location is unobstructed. Furthermore, the cabinet’s functions must operate normally, and its sensitivity should be enhanced. Malfunctions are not permissible. Therefore, after installation, a corresponding maintenance mechanism should be established. For those with the means, installing backup components is also advisable.

√√√√√√√√√√√√√√√√√√√√√√√√√

『sanli』Service Philosophy: Think from the customer's perspective, meet customer needs

When in doubt, consult first

√√√√√√√√√√√√√√√√√√√√√√√√√