RO Equipment Reverse Osmosis Scale Inhibitor Dispersant Ganzhou Electronics Factory Compatible Type. MPS3181, used in electronics factory RO equipment, is a highly efficient liquid composite reverse osmosis scale inhibitor. It ideally controls scaling and disperses deposited scale, preventing reduced pure water output and water quality after reverse osmosis membrane scaling. The product features low usage cost, economical dosage, and simple mixing ratio, making it an economical and fast water purification product. Ganzhou Electronics Factory RO Equipment Reverse Osmosis Scale Inhibitor MPS3181 Dispersant Compatible Type can be used in conjunction with Binshengxiang reverse osmosis membrane cleaning agents. Welcome to inquire and order.

Below is a brief introduction to the features of this Binshengxiang MPS3181 reverse osmosis scale inhibitor formula:

Usage Instructions

MPS3181 reverse osmosis membrane scale inhibitor is a broad-spectrum, highly efficient scale inhibitor specifically developed for reverse osmosis (RO) systems. Practical use has proven that MPS3181 is highly effective in removing the following deposits: calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, calcium fluoride, silicon dioxide, and iron. It can control the LSI in concentrated water up to 3.0, Fe3+ content up to 1.5mg/l, and silicon dioxide content up to 185mg/l. It is compatible with reverse osmosis membranes and TFC membranes from Dow Chemical (Dow Filmtec), Hydranautics, and domestic manufacturers, as well as nanofiltration membrane elements.

Product Features

Commonly used scale inhibitor for Dow Chemical (Dow Filmtec), Hydranautics, etc.; does not form insoluble substances with iron/aluminum oxides and silicon compounds; highly effective water treatment scale inhibitor with a wide range of applications; reduced dosage makes it an ideal solution for controlling scale; suitable for various types of membrane materials; allows higher system recovery rates; meets drinking water equipment scale inhibitor standards.

Usage Requirements

Dosage: Continuously add MPS3181 reverse osmosis membrane scale inhibitor to the feed water before it enters the membrane system. The typical dosage is 3-5mg/l, which may vary depending on water chemistry, membrane type, and system operating parameters (such as recovery rate, temperature, and pressure). Specific dosage should be calculated by the supplier's software.

Dilution: MPS3181 reverse osmosis membrane scale inhibitor should be added continuously. It is recommended to directly add the concentrate at the maximum frequency of the dosing pump. It can also be diluted with RO product water or desalinated water, with a dilution factor not exceeding 10.

RO Equipment Reverse Osmosis Scale Inhibitor Dispersant Ganzhou Electronics Factory Compatible Type. Binshengxiang Chemical is a manufacturer with twenty years of professional experience in producing reverse osmosis scale inhibitors. To guide users in the correct and reasonable use of this product, we provide the "Reverse Osmosis Membrane Scale Inhibitor MPS3181 Product Instruction Manual." In addition to this MPS3181, Binshengxiang, the manufacturer of reverse osmosis membrane scale inhibitors, also offers the following high-efficiency reverse osmosis chemical products. Welcome to call for inquiries and orders.