- Binary input/binary output sensor interface
- Can be installed in flush-mounted boxes with conventional sensors/switches
- Flexible LED control, capable of driving low-current LEDs due to increased output current of 3mA for commercial LEDs
- Inputs can be reconfigured as outputs with parameterizable blinking and pulsing functions
- Color-coded wiring pairs
TA 2 S KNX
- 2-gang push button interface
- 2 binary inputs for floating contacts, such as push buttons, switches
- 4-pole cable connection
- Freely assignable functions: switching/push button, dimming, blinds, valuator, sequence, LED control
TA 4 S KNX
- 4-gang push button interface
- 4 binary inputs for floating contacts, such as push buttons, switches
- 6-pole cable connection
- Freely assignable functions: switching/push button, dimming, blinds, valuator, sequence, temperature measurement, LED control
- 2 NTC inputs for actual temperature detection
TA 6 S KNX
Same as TA 4 S KNX, but:
- 6-gang push button interface
- 6 binary inputs for floating contacts, such as push buttons, switches
- 8-pole cable connection
- Can be used with 4-gang push button module (9070806)
TA 8 S KNX
Same as TA 4 S KNX, but:
- 8-gang push button interface
- 8 binary inputs for floating contacts, such as push buttons, switches
- 10-pole cable connection

Product Selection
Model Article Number
TA 2 S KNX 4969222
TA 4 S KNX 4969224
TA 6 S KNX 4969226
TA 8 S KNX 4969228

Technical Data
TA S KNX
KNX operating voltage Bus voltage ≤10 mA
Connection cable length 25cm
Contact current 0.5 mA
Ambient temperature -5°C…+45°C
Protection type IP20
Protection class III