ECS-7000MB Water Pump Energy-saving Controller / Rainwater/Sewage Pump Energy Efficiency Controller

Product Introduction:

The ECS-7000MB Water Pump Energy-saving Controller adopts microprocessor control technology, with an LCD screen displaying real-time operating status. It features main circuit on/off control, manual/automatic control, liquid level detection, device self-check, and external linkage. The system operates stably and reliably, comes with a communication port, and offers good scalability and maintainability. It can be widely used in various construction projects such as residential buildings, factories, schools, hospitals, shopping malls, hotels, theaters, exhibition halls, and office buildings.

Same Series Products:

ECS-7000MF Exhaust Fan Energy-saving Controller

ECS-7000MKT Air Conditioning/Fresh Air Unit Energy-saving Controller

ECS-7000MZM Intelligent Lighting Controller

ECS-7000MU Universal Energy-saving Controller

ECS-7000MB Water Pump/Rainwater/Sewage Pump Energy-saving Controller  

ECS-7000MR Hot Water Circulation Pump Energy-saving Controller

ECS-7000MT Cooling Tower Energy-saving Controller

ECS-7000MQ Cooling Water Pump Controller

ECS-7000MD Chilled Water Pump Controller

ECS-7000MZK Cold and Heat Source Collector

For more product information and pricing, please call our company.

Contact: Manager Wu

Phone: 13891834587 (same number for WeChat)   

Q    Q: 407693430

Email: 407693430@qq.com

Product Features:

Integrates secondary circuits for rainwater and sewage pump electrical control cabinets.

Manual remote automatic control, sump liquid level detection; device self-check; external linkage.

Provides and records real-time system liquid level over-limit alarms.

Offers motor protection against overtime, overload, phase loss, imbalance, underload, leakage, blockage, and power failure recovery; provides fault location and cause for submersible sewage pumps and electrical control boxes, facilitating quick equipment maintenance.

Technical Parameters:

1. Auxiliary power supply: DC24V;

2. Sensor wiring method: RS485 communication or two-wire bus (non-polarized) with the detector;

3. Water pump control method: Dry contact/24VDC;

4. Digital switch input: 16 independent switch signal input points (capable of monitoring the status of drainage pumps, water supply pumps, fire pumps, etc., including operation, fault, high/low liquid level, supporting forced start for fire protection, alarm, etc.);

5. Digital switch output: 6 independent relay output points (customizable output functions);

6. BA communication: 1 RS485 port (polarized) for remote BA system monitoring, MODBUS-RTU protocol;

7. Control modes: Manual/remote-automatic control, device self-check, time control, high/low liquid level linkage control, etc.;

8. LCD screen real-time display: Device information, real-time status, alarm text, etc., with rich and intuitive content for user convenience.