Ultrasonic Open Channel Flow Meter WXZJ-6000X Open Channel Ultrasonic Flow Meter

Features

Stable and Reliable: In our circuit design, we use high-quality modules starting from the power supply section, and key components are procured with high stability and reliability.

Software Technology: The radar intelligent technology software can perform intelligent echo analysis without any debugging or other special steps, featuring dynamic thinking and dynamic analysis capabilities.

High Accuracy: Our company's radar intelligent technology significantly improves the accuracy of the level meter, achieving a level accuracy of ±2mm, with strong on-site anti-interference functionality.

Low Failure Rate, Easy Installation, and Maintenance: This instrument is a non-contact device that does not come into direct contact with liquids, resulting in a low failure rate. The device offers multiple installation methods and can be fully calibrated using this manual.

Multiple Protections: The device has an IP67 protection rating; the circuit section includes isolation protection functions to prevent damage such as short circuits and lightning strikes.

Technical Specifications

Range: 0-40m (large range customizable, blind zone: 0.1m～0.5m);   Ranging Accuracy: ±2mm; 

Power Supply Voltage: DC9-36V/AC220V with built-in lightning protection; Host Display: LCD display (resolution 1mm);

Analog Output: 4～20mA (optional 1-2 relay outputs);; Sensor Pressure Resistance:; 0.2MPa; IP67;

Digital Output: RS485, Modbus protocol, or custom protocol;; Ambient Temperature: -40℃ to 80℃;

Installation Method

Pool Installation (generally using L-type bracket installation)

a、; The sensor installation position should maintain a certain distance from the inner wall of the pool (;50cm or more) to prevent electromagnetic waves from hitting protrusions on the pool wall and causing multiple echoes; the transmitter surface of the probe must remain absolutely parallel to the measured water surface;

b、 The installation height should be less than the factory-set range of the device;

c、 The highest water level is the upper limit range that the device can measure;

d、 The blind zone (0.1-0.5m) range cannot be measured by the device;

e、 L refers to the actual water level height; H refers to the air height (distance).           

Precautions

Do not shake or collide the device violently during use and transportation. Avoid contamination of the probe surface by oil stains and various chemicals, and prevent surface damage. During transportation and storage, the ambient temperature must not be below -40℃ or above +80℃, relative humidity must not exceed 85%, and the surroundings must not contain corrosive gases or strong electromagnetic fields; the original packaging box must be used during transportation.