KEDLY-A Cable Fault Tester

I. Product Overview:
The KEDLY-A Cable Fault Tester, developed and manufactured by our company, breaks the monopoly of foreign companies in this field. The cable fault tester (pre-location host) adopts advanced technology, presenting all high-resistance fault waveforms as simple low-voltage pulse waveforms, making fault distance judgment effortless and straightforward.
The KEDLY-A Cable Fault Tester is used to test high-resistance leakage faults, flashover faults, low-resistance grounding, and open-circuit faults in various power cables.
II. Instrument Functions and Features:
1. Capable of testing high and low-resistance faults in all cables up to 35KV and below, with wide adaptability;
2. Features user-friendly software and a fully Chinese menu. Key definitions are simple and clear, and measurement methods are straightforward and fast;
3. Fault detection success rate, testing accuracy, and ease of use surpass domestic counterparts;
4. Utilizes an oversized touch LCD screen as the display terminal, with powerful data processing capabilities and a user-friendly interface;
5. Equipped with safe high-voltage sampling protection measures, ensuring the tester does not crash or get damaged in high-voltage impact environments; 
6. No testing blind spots;
7. Built-in rechargeable lithium battery as the pre-location host power source, allowing testing of open-circuit and low-resistance short-circuit faults in cable environments without power.
III. Main Performance Indicators:
1. Testing methods: Low-voltage pulse, high-voltage flashover, speed measurement;
2. Impact voltage: Below 35KV for power cables;
3. Data sampling rate: 80MHz, 40MHz, 20MHz, 10MHz;
4. Testing distance: ≤60Km;
5. Reading resolution: ≤1.00m;
6. System testing accuracy: Less than 50cm;
7. Test cable pulse width settings: "0.05", "0.1", "0.2", "0.5", "1", "2", "8" microseconds; 
8. Waveform storage function: Allows on-site test waveforms to be conveniently stored in the instrument in a specified order for easy recall and observation. Capable of storing a large number of on-site test waveforms;
9. Enables side-by-side and overlay comparison of the measured fault point waveform with the full-length open-circuit waveform of a good phase on the same screen, with automatic fault distance judgment;
10. Built-in power: The pre-location test host (with built-in lithium battery) can operate continuously for over 3 hours after a full charge and can also work with an external AC power source;
11. Operating conditions: Temperature -10℃ to +45℃, relative humidity 90%.
IV. System Composition and Working Principle:
The system composition of the cable fault tester is shown in the block diagram below:

The cable fault rapid tester mainly consists of a high-voltage impact unit and a waveform recording analyzer (test host).
1. High-Voltage Pulse Generator   
The high-voltage pulse generator is the energy supply part of the cable fault pre-location system, providing high-voltage, high-energy voltage pulses. It is mainly composed of a step-up transformer, high-voltage rectifier diodes, charging capacitors, and discharge gaps.
2. Waveform Recording Analyzer (Ranging Host)
This part serves as the brain of the entire instrument, responsible for sending commands to other components, coordinating their work, and providing a human-machine interface for the operator. Its main functions include high-speed sampling and recording of measurement pulses, followed by high-speed computational analysis of the collected signals.
V. Instrument Configuration:
1. Cable Fault Pre-location Test Host (Ranging Host)         One unit
2. DC High-Voltage Signal Generator (Optional)                       One unit
3. Signal Sampling Cable                                        One piece
4. High-Voltage Capacitor                                           One piece
5. Instrument Charger                                        One unit
6. Current Sampling Box                                        One unit
7. High-Voltage Signal Gap                                    One piece
8. Product User Manual                                 One copy
9. Product Certificate (Warranty Card)                       One copy