Epoxy putty is a two-component solvent-free epoxy putty made from epoxy resin and pigments. Specifically developed for cement cracks, it possesses strong adhesion, hardness, high compressive, flexural, and shear resistance, among other physical properties. Therefore, it can be used for reinforcing construction and achieving excellent results.
1. Product Features
| II. Performance Indicators | HG/T3354-2003 | "Various Epoxy Putties" | |
| | | |
| Item | Indicator | Test Method |
| Putty Appearance | No caking or unmixable hard lumps | |
| Putty Film Color and Appearance | Uniform, putty film should be smooth, with no obvious coarse particles or cracks | |
| Consistency/cm | 10-12 | GB/T1749 |
| Drying Time/h | Air Drying | ≤24 | GB/T 1728 |
| Baking (105±2)℃ | ≤1 | GB/T1728 |
| Spreadability | Easy to spread, no curling | GB/T 1727 |
| Flexibility/mm | 50 | GB/T1748 |
| Impact Resistance/cm | ≥15 | GB/ 1732 |
| Sandability (with 200g weight, sanded 100 times with 400 or 320 grit sandpaper) | Easy to sand into a smooth, matte surface without sticking to sandpaper | GB/T 1770 |
| Nitrocellulose Lacquer Resistance | No swelling, wrinkling, or bleeding of the paint film | HG/T 3354-2003 |
III. Application Scope
? Surface repair of concrete or damaged structures, load-bearing columns, beams, etc., in industrial and civil facilities.
? Reinforcement and repair of damaged industrial and civil buildings that do not meet design requirements, as well as emergency repairs of municipal concrete roads. Particularly suitable for emergency repairs of municipal roads, airport runways, bridges, and mine tunnels.
IV. Construction Process
? Epoxy putty can be used as a full repair protective surface layer on concrete and masonry structures. During mortar application, the substrate surface must be clean, dust-free, oil-free, and free of chemical corrosive residues. Porous material surfaces should be pre-cleaned, and steel surfaces should have loose rust removed.
? Completion: Mixing Ratio: Epoxy Putty A: Epoxy Putty B = 3:1, Unit Consumption: 1.5 kg/m2.
