5-ton Press Machine, Beijing Food Waste Pressing, Shanghai Food Waste Pressing and Dewatering Equipment
Price:Negotiable
Contact Info
- Add:新鄉市牧野區環宇大道周村工業園, Zip: 453000
- Contact: 朱經理
- Tel:15837365395
- Email:203778725@qq.com
Other Products
Description
Additional Information
II. Technical Specifications
1. Processing Capacity: 0–30 T/H;
2. Pressing Screw
(1) Diameter: 260–860 mm;
(2) Pitch: 160–800 mm;
(3) Rotation Speed: 12 r/min;
3. Screen Cylinder Gap: 0.2–2.5 mm
A feed hopper is installed in the middle of the machine body. The material to be dehydrated is fed into the hopper. The juice squeezed out by the screw flows through the screen cylinder into the juice collection tray and is discharged through the juice outlet pipe. The dehydrated residue is discharged from the outlet at the end of the screen cylinder.
The working process of this twin-screw press is as follows: the conveying screw pushes the material entering the hopper toward the pressing screw. Through the reduction in screw pitch and increase in shaft diameter of the pressing screw, and under the resistance of the screen wall and the conical body, the liquid content (such as fruit juice) in the material is squeezed out. The squeezed liquid flows out through the screen holes and collects in the juice collection hopper. The pressed residue is discharged from between the end of the screen cylinder and the conical body. A spring is installed at the rear of the conical body. By adjusting the preload force and position of the spring, the discharge resistance and the size of the residue outlet can be changed to regulate the dryness of the pressed material. The 5, 10, and 20 T/H presses are equipped with twin screws rotating in opposite directions, providing strong and uniform pressing force on the material. The conical body at the residue outlet is controlled by a hydraulic cylinder. Adjusting the oil pressure can alter the pressing effect on the material and modify the juice yield. This machine can also be used for solid-liquid separation of other materials, though the effectiveness may vary depending on the material quality. The feed hopper, screen cylinder, and screw are all made of high-quality acid and alkali-resistant 304 stainless steel.
★ Product Description:
1. Juice extraction from various pomace, sea buckthorn, crushed ginger, bamboo shoots, and other fruits and vegetables;
2. Dehydration of fermented rice bran distillers' grains, cassava residue after biogas fermentation; dehydration of Gynostemma pentaphyllum, stevia, cabbage, sedge, celery, Chinese herbal residue, chrysanthemum, etc.; as well as dehydration of wood, wheat straw, rice straw, reed, etc.;
3. Press dewatering in environmental protection industries such as market waste and domestic waste;
★ Equipment Composition:
This equipment mainly consists of a frame, feeding part, pressing part, transmission part, and electrical control part. The twin-screw system includes counter-rotating conveying and pressing screws. The single-screw press, in addition to having a powerful feeding device and anti-reverse device, features three screw sections: the feeding screw, pressing screw, and extrusion screw.
| Industry Category | |
|---|---|
| Product Category | |
| Brand: | |
| Spec: | |
| Stock: | |
| Origin: |
