Product Introduction
Product Application
This cable is suitable for dry or damp indoor installation, especially for use in industrial environments. As a control and power connection cable, it is commonly used in machine tools, aging equipment, power plants, electrical installations, etc. With a special flexible design, it is also suitable for free-moving, non-mandatory continuous reciprocating motion installation scenarios. The anti-oxidation galvanized steel wire braided armor layer and double-layer sheath structure design enable the cable to operate in harsh environments and provide excellent drag resistance. The special polyvinyl chloride material offers outstanding resistance to acids, alkalis, and oils.
Product Features
Cable resistant to acids, alkalis, and oils
Cable structure with an inner sheath enhances protection
Complies with EMC requirements.
Good chemical resistance
Technical Certification
Complies with RoHS standards
Complies with the 2014/35/EU directive ("Low Voltage Directive") CE Maintaining a dust-free environment in laboratories and production settings Customization available for special structures, other dimensions, core wires, and sheath colors.

Structural Parameters
Conductor material: Bare copper wire
Conductor class: Complies with IEC60228 cl.5 standard
Core insulation: PVC-J-80-005
Core identification <0.5 mm2: 5 cores and below use color differentiation, compliant with n.DIN 47100; above 5 cores, multi-core cables use color differentiation with white ink dots for identification; ≥0.5 mm2: 5 cores and below use color differentiation, including yellow/green ground wire, compliant with n.DIN 47100; above 5 cores, multi-core cables use black cores with white ink numbering for identification (customization available for special requirements)
Stranding: Layered stranding
Inner sheath: PVC
Armor: Galvanized steel wire
Outer sheath material: DQPVC-H-80-005
Outer sheath color: Black
Rated voltage: 300/500 V
Test voltage: 2 kV

Conductor resistance: Complies with IEC 60228 cl.5 standard
Insulation resistance: Min. 20 MΩ x km
Minimum bending radius (fixed): 6xd
Minimum bending radius (mobile): 20x d
Temperature rating (fixed): -40°C/+80°C
Temperature rating (mobile): -5°C/+80°C
Temperature +70°C Operating temperature: +150°C Short-circuit temperature
Standard: Complies with EN 50525-2-5110.6/1 kV-Type: Insulation thickness follows 1KV standard thickness