BASF Turbine Oil Demulsifier Basorol PDB 9393 I. Technical Specifications The product meets the technical requirements specified in the table below: | Item | Basorol PDB 9393 | |---------------------|---------------------------| | Appearance | Colorless liquid | | pH | 8–9 | | Flash point | >100°C | | Density | 1.02 g/cm3 (23°C) | | Solubility in water | Insoluble | | Viscosity | 1100–1300 mPa·s (25°C) | II. Performance This product is a highly effective demulsifier that significantly improves the demulsibility of lubricating oils. It is commonly added to lubricants to accelerate oil-water separation and prevent emulsion formation. It is primarily used in bearing oils, turbine oils, anti-wear hydraulic oils, compressor oils, and other lubricants that come into contact with water during operation. III. Application The product can be directly added to oils requiring demulsibility. The recommended dosage is 15–100 ppm, with the exact amount to be determined through testing. IV. Packaging The product is packaged in 25 kg and 200 kg containers. Each container is labeled with the product name, specifications, batch number, net weight, and manufacturer name. V. Transportation and Storage Handle with care during transportation to avoid impact. Store in a well-ventilated, dry, and cool place. When stored in its original sealed container, the product has a shelf life of 24 months. If stored for more than 2 years, it is recommended to test and analyze the product to confirm its quality before use.