Topcoat Varnish/Topcoat Finish Sales Vendor/Keguan Coatings【Product Consultation - Manager Liu: 186_0280_5638】Supplies to Sichuan, Chengdu, Yunnan, Chongqing, and other regions; Topcoat varnish is a transparent coating primarily used as a protective layer on painted surfaces. It enhances the glossiness and fullness of the coating, improves weather resistance, wear resistance, and scratch resistance, and protects the base color paint or substrate from UV rays, moisture, and chemical erosion. It is commonly used in furniture, automotive, architectural decoration, and other fields.

How to deal with bubbles and sagging during topcoat varnish application?
Causes of bubbles: High moisture content in the substrate, air mixed in during paint stirring, excessively high application temperature (solvent evaporating too quickly).
Solutions: Ensure the substrate is dry, let the paint sit for 10-15 minutes after stirring to eliminate bubbles, control the application temperature, or adjust the evaporation rate of the thinner.
Causes of sagging: Excessive thickness per coat, overly low paint viscosity, spray gun held too close to the surface.
Solutions: Apply multiple thin coats (each dry film ≤10μm), adjust viscosity to the specified range, maintain a spray gun distance of 15-25cm from the substrate.

Can topcoat varnish be applied directly without sanding?
No. Sanding is necessary to remove surface impurities, increase roughness, and enhance adhesion; if the substrate is smooth metal or an old painted surface, skipping sanding may cause the varnish to peel off.

This article is excerpted from the internet. If you find any issues, please contact us, and we will address them promptly. Thank you.